中文版 | ENGLISH | РУССКИЙ
Products Center
Series of glass wool
Series of rock wool
(PVC/NBR)Series of rubber sponge
Series of polyurethane heat preservation
(PEF)Series of high-pressure polythene
Series of aluminum silicate heat preservation
Glass wool felt
Rock wool board
search
Products Center
(PVC/NBR)Grade B2 rubber plastic insulation board

  • Introduction
  • Parameters

FUERDA rubber plastic insulation board has low thermal conductivity, full-closed structure, and excellent continuous heat insulation. The material is completely isolated with vapor, so it has the properties of water-proof, anti-condensation and long lifetime. After SGS testing, its measured value is much lower than EU standard value on materials without toxic substances, so it is safe and healthy. Moreover, with beautiful appearance, it is easy for bending and construction, and no need of other accessories.

Click to show big image Click to show big image

Distinctive advantages:
 •  Closed structure can effectively prevent thermal conduction. 
 •  Thermal conductivity 0.034W/m¡¤k while 0
 •  High heat emission coefficient of surface, up to 9W/m2k. 
 •  Excellent anti-steam permeated ability; moisture resistance 4,500 (DIN 52615); "built-in" steam-proof coating; the insulation board is insulating layer and moisture-proof coating as well. 
 •   Excellent fireproofing; oxygen index is above 28. 
 •   Easy for installation. 
 •  No CFC, HFC, HCFC or other materials containing fluorine, also no formaldehyde, dust or fiber.


FUERDA rubber plastic insulation board has excellent fireproof performance. According to international GB/T17794-1999<Division Methods of construction material burning performance>, FUERDA rubber sponge insulation board is judged as GB/T17794-1999 Grade "B2" difficult-flammable material after testing.


Application areas:
 •  Refrigeration unit and equipment for air-conditioning system 
 •   Frozen water pipe 
 •  Condensing water pipe 
 •  Air duct and hot water pipeline


Product specifications:
rubber plastic board (1m wide)
thickness 10mm 13mm 15mm 18mm 20mm 23mm 25mm 28mm 30mm
m/pc 20m 20m 20m 10m 10m 10m 10m 10m 10m
It can be ordered to produce if there is big demand of board with thickness of 13mm, 18mm, 23mm or 28mm.
We can also offer other specs of products. Welcome to contact us!


Packing:
FUERDA rubber plastic insulation board adopts transparent packing for convenient direct-viewing. Also we accept OEM for different brands of products based on requirements of customers all over the world.

Technical Parameters

item unit performance index
0 Grade I Grade II Grade
board pipe board pipe board pipe
density Kg/m3 65-70 60-65 60-65
combustibility - grade 0 grade B1 grade B2
oxygen index 40 oxygen index 32 oxygen index28 28
fume density 70 fume density(SDR) 75 fume density(SDR) -75
thermal conductivity
(average temperature)
W/m.k 0.034
moisture permeability moisture permeable coefficient G/(m.s.pa) 10x10-10 7x10-10 4.5x10-10
moisture-resistant gene - 10x103 7x103 4.5x103
vacuum water absorption % 10
dimension stability
(105+-3,7d)
% 10
tear strength N/cm

3.0

compressive rebound degree
compressibility 50% compression time72h
% 70
ozone resistance
(ozone partial pressure202Pa 200h)
- no crack
aging resistance(150h) - minor wrinkle, no crack, pinhole-free, non-deformed.

© Copyright 2008 Fuerda Chenmical Materials Co.,Ltd.